Beneficiation of Barite Ore from Azara in Nassarawa State, Nigeria, using Froth Flotation
Keywords:
Barite, Froth Flotation, Specific gravity, pH, JiggingAbstract
Barite ore from Azara in Nassarawa State has been beneficiated using Jigging and Froth Flotation techniques by varying the pH of the solution. The chemical analysis indicates the presence of major elements Ba, S, O and minor elements like Ti, V, Al and Si which confirms that it is barite while the particle size analysis showed that the average particle size is ≈ 150 µm with a 1,167 cm2/g specific surface area. The X-ray diffraction analysis of both the as-mined ore and beneficiated samples indicate increased intensity in the later. The jigging result shows that 51% of the feed is the underflow while 46.7% is the overflow. The measured specific gravity as a function of pH show that values between 3.78 and 4.23 are obtained. The elemental composition of the Barite after beneficiation shows that in addition to high contents of BaO and SO3, the amount of SiO2 present is still very high. The sample with a pH value of 7 gave the highest specific-gravity value of 4.23 while that with pH of 3 gave the lowest specific-gravity value of 3.78. The implication is that the barite sample with pH of 7 is acceptable for oil and gas applications while more work is needed for samples with other pH values.
Downloads
Published
Issue
Section
License
In accordance with the Copyright Act of 1976, which became effective January 1, 1978, the following statement signed by each author must accompany the manuscript submitted: "I, the undersigned author, transfer all copyright ownership of the manuscript referenced above to the Nigerian Journal of Technological Development, in the event the work is published. I warrant that the article is original, does not infringe upon any copyright or other proprietary right of any third party, is not under consideration by another journal, and has not been published previously. I have reviewed and approve the submitted version of the manuscript and agree to its publication in the Nigerian Journal of Technological Development." A copyright transfer form should be downloaded from the NJTD Website ( http://njtd.com.ng/index.php/njtd). Author(s) will be consulted, whenever possible, regarding republication of material. All authors must have access to the data presented and the authors and sponsor (if applicable) must agree to share original data with the editor if requested.