Geological and Electrical Resistivity Sounding of Olokonla Area in North-Central Nigeria
Keywords:
Vertical electrical sounding, aquifer, electrical resistivity, anisotropy polygon, geological mapping, fracture patternAbstract
Geological mapping and Electrical resistivity sounding were carried out in Olokonla area in Moro Local Government of Kwara State in order to determine the apparent resistivities of the subsurface lithologies and correlate them with the exposed rocks observed during the geological mapping. The studies also delineate the pattern of fractures in the area which form prefential pathways for ground water. Three vertical electrical soundings (VES) were performed radially adopting the Schlumberger electrode configuration, with half-current electrode separation (AB/2) varying from 1m to 100m. Anisotropy polygon was also constructed based on the radial electrical sounding. The geoelectric parameters revealed five subsurface layers which were interpreted as topsoil, lateritic soil, dry sand soil, weathered granite and granite respectively. The geological mapping showed that the area is underlain by crystalline rocks comprising biotite granite, granite-gneiss and migmatite. The anisotropy polygon showed that a major fracture direction along 600 (northeast to southwest) and the coefficient of anisotropy is 0.79. Based on the apparent resistivities and the structural disposition, a potential aquifer was inferred at a depth of 45m. The fracture pattern in the area was constrained to northeast to southwest direction. The data obtained would be useful in borehole drilling for water within the study area.
Downloads
Published
Issue
Section
License
In accordance with the Copyright Act of 1976, which became effective January 1, 1978, the following statement signed by each author must accompany the manuscript submitted: "I, the undersigned author, transfer all copyright ownership of the manuscript referenced above to the Nigerian Journal of Technological Development, in the event the work is published. I warrant that the article is original, does not infringe upon any copyright or other proprietary right of any third party, is not under consideration by another journal, and has not been published previously. I have reviewed and approve the submitted version of the manuscript and agree to its publication in the Nigerian Journal of Technological Development." A copyright transfer form should be downloaded from the NJTD Website ( http://njtd.com.ng/index.php/njtd). Author(s) will be consulted, whenever possible, regarding republication of material. All authors must have access to the data presented and the authors and sponsor (if applicable) must agree to share original data with the editor if requested.