Dynamic Analysis of Series-Connected and Mechanically-Coupled Twin Synchronous Motor Drive

Authors

  • I. K. Onwuka
  • G. C. Diyoke
  • E. S. Obe

Abstract

Series-connection of the stator windings of electric motors could serve a number of purposes, including load balancing between two synchronous motors. This paper modeled and analyzed a drive system of two separate three-phase synchronous motors whose stator windings are series-connected by a unique stator winding scheme, and whose shafts are mechanically coupled to a common load shaft through a speed reduction gear driven through the pinions of the respective motors. The mathematical model is developed in detail, and the system is simulated using MATLAB/SIMULINK. It is observed that for the case of a balanced load on the respective shafts of the two motors, the dynamic behavior of the two motors are identical. It is further observed that with the particular stator winding arrangement giving rise to six-windings per motor unit, each motor is essentially a three-phase motor and may be operated direct on line (DOL).

Additional Files

Published

2020-03-23

Issue

Vol. 17 No. 1 (2020)

Section

Articles

License

In accordance with the Copyright Act of 1976, which became effective January 1, 1978, the following statement signed by each author must accompany the manuscript submitted: "I, the undersigned author, transfer all copyright ownership of the manuscript referenced above to the Nigerian Journal of Technological Development, in the event the work is published. I warrant that the article is original, does not infringe upon any copyright or other proprietary right of any third party, is not under consideration by another journal, and has not been published previously. I have reviewed and approve the submitted version of the manuscript and agree to its publication in the Nigerian Journal of Technological Development." A copyright transfer form should be downloaded from the NJTD Website ( http://njtd.com.ng/index.php/njtd). Author(s) will be consulted, whenever possible, regarding republication of material. All authors must have access to the data presented and the authors and sponsor (if applicable) must agree to share original data with the editor if requested.