Effect of Using Sugar and Gypsum as a Retarder on Concrete Properties in Omani Weather

Authors

  • sreedhar reddy sajjala University of Nizwa https://orcid.org/0000-0003-1875-8680
  • Subhi Aziz Ali College of Engineering and Architecture, University of Nizwa
  • Khaldoon Waleed Thanoon College of Engineering and Architecture, University of Nizwa

Keywords:

Hot weather, Initial setting time, compressive strength, sugar, gypsum

Abstract

This study deals with the retardation of cement setting time and workability in hot weather such as in Sultanate of Oman. Combination of sugar and gypsum was used as retarders. The aim of this study was to investigate the effect of retarders on consistency, setting time of ordinary Portland cement (OPC) paste and compressive strength of concrete cubes after 7 days of curing. OPC paste with a water cement ratio 0.4 to 0.5 was prepared by mixing 500 grams of ordinary Portland cement, a fixed amount of sugar of 0.02% by weight of cement
with a combination of different gypsum of 1, 2, 3, 4, and 5% by weight cement and water. Sugar has a strong retarding effect, and this effect, controlled by Gypsum, can shorten the long setting time caused by sugar. The setting time of cement paste was reduced from 5.5 hours to 3 hours with an increase in Gypsum at a fixed amount of sugar. At a constant sugar content, increasing the gypsum content reduced the compressive strength from 31.5 MPa
to 30.92 MPa.

References

Ahmad, S.; A. Lawan and M. Al-Osta (2020). Effect of sugar dosage on setting time, microstructure and strength of Type I and Type V Portland cements. Case Studies in Construction Materials, 13, p.e00364.

Al Martini, S.; R. Sabouni and A. El-Sheikh (2021). Fresh, Durability and Mechanical Behavior of Self Consolidating Concrete Incorporating Fly Ash and Admixture under Hot Weather. Key Engineering Materials, 904:453-457.

ASTM Standard:C09.20(2007). Standard test method for density, relative density (specific gravity), and absorption of coarse aggregate. ASTM International,

West Conshohocken, PA.

Assi, L.; E. Deaver and P. Zieh (2018). Using sucrose for improvement of initial and final setting times of silica fume-based activating solution of fly ash geopolymer concrete. Construction and Building Materials, 191:47-55.

BS 882:(1992). Specification for aggregates from natural sources for concrete. British Standards Institution, London, United Kingdom.

ASTM Standard: C01(1998). Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste. ASTM International, West Conshohocken, PA.

ASTM Standard:C01(2004). Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle. ASTM International, West Conshohocken, PA.

Cuesta, A.; I. Santacruz, S.G. Sanfélix; F. Fauth; M.A.G. Aranda and A.G. De la Torre. (2015). Hydration of C4AF in the presence of other phases: A synchrotron Xray powder diffraction study. Construction and Building Materials, 101:818–827.

Deschner, F.; B. Lothenbach; F. Winnefeld and J. Neubauer. (2013). Effect of temperature on the

hydration of Portland cement blended with siliceous fly ash. Cement and Concrete Research, 52:169-181.

Devakate, A.B; V.T. Acharya and Keerthi Gowda, B.S.(2017). Effect of sugar on setting-time and

compressive strength of ordinary Portland cement paste. Int. J. Adv. Struct. Geotech. Eng., (04):2319-5347.

Doudart de la Grée, G.C.H.; Q.L. Yu and H.J.H. Brouwers. (2017). Assessing the effect of CaSO4

content on the hydration kinetics, microstructure and mechanical properties of cements containing sugars. Construction and Building Materials, 143:48–60.

Ham, S. and Oh, T.(2013). Effect of Mixing and Placing in Hot Weather on Hardened Concrete

Properties. International Journal of Concrete Structures and Materials, 7(2):165-174.

Khan, B. and Muhammad-Ullah, M.(2004). Effect of a Retarding Admixture on the Setting time of Cement Pastes in Hot Weather. Journal of King Abdulaziz University-Engineering Sciences, 15(1):63-79.

Kandhari, Y (2017). Effect of a retarding admixture on the setting time of cement pastes in hot weather. Int. Res. J. Eng. Sci. Technol. Innov., 4:1589-1592.

Nasir, M.; U. Gazder; M. Khan; M. Rasul; M. Maslehuddin and O. Al-Amoudi. (2022). Prediction of Strength of Plain and Blended Cement Concretes Cured Under Hot Weather Using Quadratic Regression and ANN Tools. Arabian Journal for Science and Engineering, 47:12697–12709.

Neville, A. and Brooks, J. (2010). Concrete Technology (2nd Ed.). Prentice Hall, Harlow, England.

Tayeb, P.; M. Lullulangi and O. Sampebua. (2019). Effect of Retarder Usage on Concrete Characteristic. Journal of Civil, Construction and Environmental Engineering, 4(3): 69-72.

Usman, N.D.; H.A. Chom; C. Salisu; H.O. Abubakar and J.B.Gyang. (2016). The impact of sugar on setting-time of ordinary Portland cement (OPC) paste and compressive strength of concrete. FUTY J. Environ. (10)1: 107-114.

Von Daake, H. and Stephan, D.(2016). Impact of retarders by controlled addition on the setting, early hydration and microstructural development of different cements. Magazine of Concrete Research, 68(19): 1011-1024.

Zajac, M.; J. Skocek; F. Bullerjahn and M. Ben Haha (2016). Effect of retarders on the early hydration of calcium-sulpho-aluminate (CSA) type cements. Cement

and Concrete Research, 84: 62-75.

Zhang, Y.; J. Yang and X. Cao. (2020). Effects of several retarders on setting time and strength of building gypsum. Construction and Building Materials, 240:117927.

Published

2023-05-15