Optimization of Non-Thermal Treatment Methods and Extrusion Temperature on Quality of Rice Pasta Enriched with Cirina butyrospermi
Keywords:
Edible insect, Cirina butyrospermi, Ultrasound, Gluten-free, Rice Pasta, ExtrusionAbstract
Food security remains a critical global challenge, necessitating the exploration of sustainable and nutrient-rich food alternatives such as edible insects. This study investigated and optimized the effect of treatment methods (boiling, ultrasound, and a combined boiling and ultrasound treatment) on Cirina butyrospermi and extrusion temperature (70℃, 80℃ and 90℃) on some quality (crude protein, in-vitro protein digestibility, calcium, zinc, iron,
cooking time, water uptake ratio, lightness, and colour change) of rice pasta. The effect of treatment methods on Cirina butyrospermi powder and extrusion temperature on crude protein ranged from 15.85 to 18.27%, in-vitro protein digestibility (80.42-88.55%), calcium (48.53-56.25 mg/100g), zinc (2.42-3.56 mg/100g), iron (3.34-5.13 mg/100g), cooking time (8.50 - 19.50 min), water uptake ratio (1.15 - 1.90), lightness value (4.19 - 50.73) and colour change
(4.47 - 51.13), respectively. The combined boiling and ultrasound treatment on Cirina butyrospermi powder and higher extrusion temperature gave rice pasta the highest protein, calcium, zinc, and iron content while lower extrusion temperature along with boiling treatment, increased in-vitro protein digestibility. Optimum conditions for desirable
rice pasta were achieved at 80°C extrusion temperature with combined boiling and ultrasound treatment. Conclusively, exploring edible insects like Cirina butyrospermi under an accurate treatment method and extrusion condition could aid in the development of nutrient-rich rice pasta.
References
Association of Official Analytical Chemists AOAC (2012). Official methods of analysis of the Association of Analytical Chemists International, 19th edition. AOAC, Gaithersburg, Maryland.
Abo-El-Saad, M. and Shawir, M. S. (2024). Nutritional and Medicinal Value of Mineral Elements in Dates. The Egyptian Science Magazine, 11(1), 43-51.
Bermúdez-Aguirre, D.; T. Mobbs and G. V. Barbosa-Cánovas. (2011). Ultrasound applications in food processing. Ultrasound Technology for Food and Bioprocessing, 1: 65-105.
Boko, A. C. E., A. C. Koko; S. H. Blei; D. L. Yao and D. M. Angaman. (2024). Nutritional enhancement of sprouted cereal flours with Macrotermes subhyalinus and Cirina butyrospermi: a strategy for combating malnutrition. African Journal of Food, Agriculture, Nutrition and Development, 24(4).
Çabuk, B. and Yılmaz, B. (2020). Fortification of traditional egg pasta (erişte) with edible insects: Nutritional quality, cooking properties and sensory characteristics evaluation. Journal of Food Science and Technology, 57:2750-2757.
Carcea, M. (2020). Quality and nutritional/textural properties of durum wheat pasta enriched with cricket powder. Foods, 9(9): 1298.
Cavazza, A.; C. Corradini; M. Rinaldi; P. Salvadeo; C. Borromei and R. Massini. (2013). Evaluation of pasta thermal treatment by determination of carbohydrates, furosine, and color indices. Food and Bioprocess Technology, 6:2721-2731.
Carpentieri, S.; D. Larrea-Wachtendorff and G. Ferrari. (2024). Influence of semolina characteristics and pasta-making process on the physicochemical, structural, and sensorial properties of commercial durum wheat spaghetti. Frontiers in Food Science and Technology, 4, 1416654.
da Silva, E. M. M.; J. L. R. Ascheri and D. P. R. Ascheri. (2016) Quality assessment of gluten-free pasta prepared with a brown rice and corn meal blend via thermoplastic extrusion. LWT-Food Science and Technology, 68:698-706
de la Peña, E. and Manthey, F. A. (2017). Effect of formulation and dough hydration level on extrusion, physical and cooked qualities of nontraditional spaghetti. Journal of Food Process Engineering, 40(1), e12301.
Hooper, S.D.; A. Bassett; J. A. Wiesinger; R. P. Glahn; and K. A. Cichy. (2023). Extrusion and drying temperatures enhance sensory profile and iron bioavailability of dry bean pasta. Food Chemistry Advances, 3: 100422.
Jalgaonkar, K.; S. A. Jha; S. K.; M. K. Mahawar and D. N. Yadav. (2019). Pearl millet-based pasta: Optimization of extrusion process through response surface methodology. Journal of Food Science and Technology, 56(3): 1134-1144.
Jafari, M. and Koocheki, A. (2024). Impact of ultrasound treatment on the physicochemical and rheological properties of acid hydrolyzed sorghum starch. International Journal of Biological Macromolecules, 256, 128521.
Kim, T. K.; H. I. Yong; Y. B. Kim; H. W. Kim and Y. S. Choi. (2019). Edible insects as a protein source: A review of public perception, processing technology, and research trends. Food Science of Animal Resources, 39(4): 521.
Lazou, A. E. (2022). Food extrusion: An advanced process for innovation and novel product development. Critical Reviews in Food Science and Nutrition, 64(14), 4532–4560. https://doi.org/10.1080/10408398.2022.2143474
Liang, Z.; Y. Zhu; W. Leonard and Z. Fang. (2024). Recent advances in edible insect processing technologies. Food Research International, 114137.
Li, M.; J. Wang; J. Zhang; Y. Lv; S. Guo and P. Van der Meeren. (2023). In vitro protein digestibility of different soy-based products: effects of microstructure, physico–chemical properties and protein aggregation. Food and Function, 14(24), 10964-10976.
L’Hocine, L.; A. Achouri; E. Mason; M. Pitre; D. Martineau-Côté; S. Sirois and S. Karboune. (2023). Assessment of protein nutritional quality of novel hairless canary seed in comparison to wheat and oat using in vitro static digestion models. Nutrients, 15(6), 1347.
Marengo, M.; I. Amoah; A. Carpen; S. Benedetti; M. Zanoletti; S. Buratti and S. Iametti. (2018). Enriching gluten-free rice pasta with soybean and sweet potato flours. Journal of Food Science and Technology, 55, 2641-2648.
Marti, A. and Pagani M.A. (2013). What can play the role of gluten in gluten free pasta? Trends in Food Science and Technology, 31(1):63-71.
Mbayahaga, J. and Kouebou, C.P. (2018). Edible caterpillars of the Shea tree caterpillar (Cirina butyrospermi): Traditional knowledge, nutritional value and potential for sustainable development in Burkina Faso. International Journal of Agricultural and Biological Science, 14(4):101-109.
Marana, A.I.S.; A. Morris; W. Prinyawiwatkul; Z. Xu and J. M. King. (2023). High‐protein rice flour in the development of gluten‐free pasta. Journal of Food Science, 88(4), 1268-1279.
Meena, G.S.; A. Dewan A.; N. Upadhyay; R. Barapatre; N. Kumar and A. Singh. (2019). Fuzzy analysis of sensory attributes of gluten free pasta prepared from brown rice, amaranth, flaxseed flours and whey protein concentrates. Journal of Food Science and Nutrition Research, 2(1):22-37.
Marana, A. I. S.; A. Morris, W. Prinyawiwatkul; Z. Xu and J.M. King (2023). High‐protein rice flour in the development of gluten‐free pasta. Journal of Food Science, 88(4), 1268-1279.
Orkusz, A. and Orkusz, M. (2024). Edible Insects in Slavic Culture: Between Tradition and Disgust. Insects, 15(5), 306.
Orlien, V.; K. Aalaei; M. M. Poojary; D. S. Nielsen; L. Ahrné and J. R. Carrascal. (2023). Effect of processing on in vitro digestibility (IVPD) of food proteins. Critical Reviews in Food Science and Nutrition, 63(16), 2790-2839.
Piazza, L., S. Ratti; F. Girotto and S. Cappellozza. (2023). Silkworm pupae derivatives as source of high value protein intended for pasta fortification. Journal of Food Science, 88(1), 341-355.
Raji, A. O.; I. M. Olaitan; M. Y. M. Omeiza and M. S. Sanusi. (2024). Process optimization and influence of processing conditions on physical, thermal and textural characteristics of Nigerian pasta produced from acha flour and defatted Moringa oleifera powder. Food Physics, 1, 100007.
Rafiq, A.; S. Sharma and B. Singh. (2018). Effect of pregelatination on rheology, cooking and antioxidant activity of pasta. Journal of Food Science and Technology, 55:1756-1766.
Romano, A.; P. Ferranti; V. Gallo and P. Masi. (2021). New ingredients and alternatives to durum wheat semolina for a high-quality dried pasta. Current Opinion in Food Science, 41, 249-259.
Sanusi, M. S.; R. Akinoso and N. Danbaba. (2017). Evaluation of physical, milling and cooking properties of four new rice (Oryza sativa L.) varieties in Nigeria. International Journal of Food Studies, 6(2).
Sanusi, M.S.; M. Sunmonu; A. Abdulkareem and A. Alaka. (2022a). Modelling and optimization of the quality indices to produce ingredient-mix based dried chicken product (chicken kilishi). Journal of Meat Technology, 63(1): 33-50. https://doi.org/10.18485/meattech.2022.63.1.4
Sanusi, M.S.; R. Akinoso; N. Danbaba and J. B. Hussein. (2022b). Comparative studies of the effect of processing conditions on cooking and sensory properties of selected rice varieties. African Journal of Food, Agricultural, Nutrition and Development, 22(10), 21785-21806.
Sanusi, M.S.; M. O. Sunmonu; S. O. Alasi; A. A. Adebiyi and A. A. Tajudeen. (2023). Composition, bioactive constituents and glycemic index of brown rice-watermelon seeds extruded snacks as stimulated by extrusion conditions. Applied Food Research, 3(1), 100287.
Sanusi, M.S.; M. O. Sunmonu and S. O. Alasi. (2023). Influence of extrusion conditions on functional and textural properties of brown rice-watermelon seeds extruded snacks. Acta Periodica Technologica, (54), 81-91.
Sanusi, M.S.; M. O. Sunmonu; S. O. Alasi; A. A. Adebowale; I. T. Esho and A. A. Tajudeen. (2023). Modification of some quality attributes of brown rice-bambara nuts-pineapple peels extruded snacks through extrusion conditions. In conference proceedings, 1st Faculty of Engineering and Technology Conference, University of Ilorin, Nigeria (FETiCON 2023).
Suo, X., M. Dall’Asta; G. Giuberti; M. Minucciani; Z. Wang and E. Vittadini (2024). Effect of “shape” on technological properties and nutritional quality of chickpea-corn-rice gluten free pasta. LWT, 192, 115661.
Sun-Waterhouse, D, G. I. Waterhouse; L. You; J. Zhang; Y. Liu; L. Ma and Y. Dong. (2016). Transforming insect biomass into consumer wellness foods: A review. Food Research International, 89:129-151.
Suo, X.; M. Dall’Asta; G. Giuberti; M. Minucciani; Z. Wang and E. Vittadini. (2024). Effect of “shape” on technological properties and nutritional quality of chickpea-corn-rice gluten free pasta. LWT-Food Science and Technology, 192, 115661.
Taddei, F.; E. Galassi; F. Nocente and L. Gazza. (2021). Innovative milling processes to Improve the technological and nutritional quality of parboiled brown rice pasta from contrasting amylose content cultivars. Foods, 10(6): 1316.
Tazrart, K.; C. Lamacchia; F. Zaidi and M. Haros. (2016). Nutrient composition and in vitro digestibility of fresh pasta enriched with Vicia faba. Journal of Food Composition and Analysis, 47:8-15
Wang, L.; W. Duan; S. Zhou; H. Qian; H. Zhang and X. Qi. (2016). Effects of extrusion conditions on the extrusion responses and the quality of brown rice pasta. Food Chemistry, 204:320-325
Yaver, E. and Bilgiçli, N. (2021). Effect of ultrasonicated lupin flour and resistant starch (type 4) on the physical and chemical properties of pasta. Food Chemistry, 357:129758
Zhou, L., Y. Yang; H. Ren; Y. Zhao; Z. Wang; F. Wu and Z. Xiao. (2016). Structural changes in rice bran protein upon different extrusion temperatures: A Raman spectroscopy study. Journal of Chemistry, 2016. doi: 10.1155/2016/6898715.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Nigerian Journal of Technological Development
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
In accordance with the Copyright Act of 1976, which became effective January 1, 1978, the following statement signed by each author must accompany the manuscript submitted: "I, the undersigned author, transfer all copyright ownership of the manuscript referenced above to the Nigerian Journal of Technological Development, in the event the work is published. I warrant that the article is original, does not infringe upon any copyright or other proprietary right of any third party, is not under consideration by another journal, and has not been published previously. I have reviewed and approve the submitted version of the manuscript and agree to its publication in the Nigerian Journal of Technological Development." A copyright transfer form should be downloaded from the NJTD Website ( http://njtd.com.ng/index.php/njtd). Author(s) will be consulted, whenever possible, regarding republication of material. All authors must have access to the data presented and the authors and sponsor (if applicable) must agree to share original data with the editor if requested.
