Assessment of Asphalt Concrete for Untimely Road Failure in South West Nigeria
Keywords:
Asphalt concrete; aggregate; bitumen; pavement; road; sieve analysisAbstract
Assessment of asphalt concrete used for pavement construction in southwest Nigeria was carried out to determine the causes of untimely failure of newly constructed/rehabilitated asphalt roads. Samples of asphalt concrete and bitumen were collected from three asphalt plants selected for the study. Samples from each plant were subjected to bitumen extraction and sieve analysis, hot mix Marshall Stability and flow tests, penetration and viscosity tests. Results obtained were compared to the 2007 Federal Ministry of Works and Housing Standard Specifications for Roads and Bridges. The results revealed that none of the samples met all the criteria stated in the specifications, suggesting that the nature of asphalt concrete is a possible cause of premature failure of road pavements in southwest Nigeria. It is recommended that further research be conducted on other constituents of asphalt concrete as well as other structures of the flexible pavement.
References
AASHTO T 72-97 (2001). Saybolt Viscosity. standard specifications for transportation materials and methods of sampling and testing. (26th edition). American Association of State Highway and Transportation Officials, Washington, D.C
Adedimila, A. S. (2000). Bitumen: Nigeria’s other black gold? Inaugural Lecture Series, University of Lagos.
Adeyemi, G. O. and Oyeyemi, F. (2000). Geotechnical basis for failure of sections of the Lagos-Ibadan expressway, Southwestern Nigeria. Bulletin of Engineering Geology and Environment, 59(1): 39-45.
Aghamelu, O. P. and Okogbue, C. O. (2011). Geotechnical assessment of road failure in the Abakaliki Area, Southeastern Nigeria. Intern’l Journal of Civil and Environmental engineering 11(2): 12 - 24.
Akiije, I. and Oyekan, G. L (2012). Stabilization assessment of aggregates in asphalt concrete mixtures. International Journal of Scientific & Engineering Research. 3(4): 695-699.
ASTM (American Society for Testing and Materials). (2001). Standard test method for sieve analysis of fine and coarse aggregates. C136. West Conshohocken, PA, USA.
ASTM (American Society for Testing and Materials). (2005). Standard test method for marshall stability and flow of asphalt mixtures. D6927. West Conshohocken, PA, USA.
ASTM D2172-05, Standard test methods for quantitative extraction of asphalt binder from asphalt Mixtures, ASTM International, West Conshohocken, PA, 2005.
Central Bank of Nigeria (CBN) (2003). Highway maintenance in Nigeria; lessons from other countries. Research Department Occasional Paper No. 27.
Federal Road Safety Corps (2011). United Nations decade of action on road safety. Benin City Nigeria.
FMW. (2007). Pavement and materials design in highway manual part 1: Design. Volume 3, Federal Ministry of Works, Abuja, Nigeria
Gidigasu, M. D. (1980). Geotechnical evaluation of residual gravels in pavement construction. Engineering Geology, 15(3/4): 173-194.
Gupta, B. L. and Gupta, A. (2007). Roads, railways bridges tunnels & harbour dock engineering. Standard Publishers Distributors, 1705-B, Nai Sarak, Delhi.
Jegede, G. (2000). Effect of soil properties on pavement failure along the F209 highway at Ado-Ekiti, Southwestern Nigeria. Construction and Building Materials, 14: 311- 315.
Ofonime, A. and Aniekan, E. (2005). Relationship between road pavement failures, Engineering indices and underlying Geology in a tropical environment. Global Journal of Geological Sciences, 4(2): 99 - 108.
Ogunribido T. H. T, Mohammed M. Z., Adesuyi A. R. (2015) Effect of engineering properties of soil on pavement failures in Ogbagi-Akoko area, Southwestern, Nigeria. Journal of Environment and Earth Science. 5(4): 39-42.
Roberts, F. L., Kandhal, P. S., Brown, E. R., Lee, D. Y. and Kennedy, T. W. (1996). Hot mix asphalt materials, mixture design and construction. National Asphalt Pavement Association Education Foundation, Lanham, MD.
Salter, R. J. (1994). Highway design and construction (2nd ed.), Macmillan Press Ltd, UK.
World Factbook (2004) available on the Central Intelligence Agency Website https://www.cia.gov
Downloads
Published
Issue
Section
License
In accordance with the Copyright Act of 1976, which became effective January 1, 1978, the following statement signed by each author must accompany the manuscript submitted: "I, the undersigned author, transfer all copyright ownership of the manuscript referenced above to the Nigerian Journal of Technological Development, in the event the work is published. I warrant that the article is original, does not infringe upon any copyright or other proprietary right of any third party, is not under consideration by another journal, and has not been published previously. I have reviewed and approve the submitted version of the manuscript and agree to its publication in the Nigerian Journal of Technological Development." A copyright transfer form should be downloaded from the NJTD Website ( http://njtd.com.ng/index.php/njtd). Author(s) will be consulted, whenever possible, regarding republication of material. All authors must have access to the data presented and the authors and sponsor (if applicable) must agree to share original data with the editor if requested.